The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
ATISmirus 80
Pneumatic Manipulator with articulated rigid arms, the smallest one of its category . Developed for handling light products but with particular geometry is ideal for sustained working cycles.
Lightness, precision and speed are the main features of this manipulator. Can be integrated with custom made gripping tools, designed and structured according to specific customer requirements.
| TECHNICHAL CHARACTERISTICS |
|
| Supply: |
compressed air |
| Transmission of motion: |
through a parallelogram and terminal arm |
| Configuration : |
- column mounted fixed to the floor |
| Net capacity: |
115 Kg * (2100 mm radius) |
| Radius max: |
3100 mm* (range 60 kg) |
| Radius min: |
400 mm |
| Vertical lift: |
1250 - 1500 mm |
| Air pressure: |
from 0.5 to 0.8 MPa of clean, dry and oil free compressed air |
| Column axis: |
360° continuous rotation |
| Intermediate axis: |
max 300° rotation |
| Noise level: |
<70 dB |
| * Operating air pressure 0.7 MPa, gripping tool not included. The values are purely indicative and may be increased and decreased from our technical department to suit specific customer requirements. |
|
At a glance:
- articulated rigid arms
- handling light products
- lightness
- precision
- speed
- integrated with customized equipment
Photogallery
ATISmirus 80, manipolatore pneumatico a bracci rigidi snodati